Linking Media Routing Server (MRS) to Other Modules

Use

MRS is used for the following services:

  • Playing prompts.

  • Recording calls.

  • Network address translation (NAT) on RTP streams.

  • Routing RTP streams through it.

  • Encrypting endpoint of RTP streams.

  • Branching calls to quality management or other systems.

  • Interpreting and producing RFC 2833 DTMF telephony events.

Modules needing MRS services must have proper MRS modules assigned to them. Most MRS services are assigned in System Management > Modules > Media Routing Server. NAT and routing are assigned using Call Switching > Locations. Playing prompts can be assigned both ways.

In view, link the Media Routing Server (MRS) to the modules that need its services.

Note:

If no MRS is linked, the services listed above do not work in the system.

MRS must be linked to the following modules:

  • Call Dispatcher (CD), to play prompts for internal callers.

  • Bridges, that are connected to PSTN trunks.

  • External Terminal Controller (ETC), to play prompts for MTD phones.

Other services require either the Call Dispatcher linking, or MRS allocated via a location.

You can link one MRS module to all the modules that need MRS services, or you can dedicate one or more MRS modules for a certain purpose.

If the system is located on several sites in the world, consider installing MRS on each location.

Note:

Linking the MRS module to a certain ETC module does not guarantee that the specific MRS module is dedicated to the desk phones of that ETC. For example, to make sure that a local MRS is used for desk phones of that location, define a location using IP addresses or agent numbers and allocate the local MRS for it in Call Switching > Locations, see Managing Locations.

Procedure

To link modules to a specific MRS module:

  1. Choose the desired module from the list of Available Modules.

  2. Click the > arrow button to move the module to the list of Selected Modules.

    If a module has several Media Routing Servers, you can set the priority (that is, in which order they are used) between the module and MRS.

  3. Save your entries.

To break the link between MRS module and other modules:

  1. Choose the desired module from the list of Selected Modules.

  2. Click the < arrow button to move the module to the list of Available Modules.

  3. Save your entries.

Example

In our recommended installation model, we configure the following MRS modules:

  • Dedicate one MRS module for playing prompts towards softphones and desk phones: link one MRS to Call Dispatcher, ETC, and to the SIP Bridge that is dedicated for SIP desk phones.

  • Dedicate one MRS module for playing prompts towards PSTN: link one MRS module to the PSTN SIP Bridge and H.323 Bridge modules. This enables playing prompts for trunks connecting the system to PSTN or PBX.

  • Dedicate one MRS module for recording: In IA, select Use for Server-Side Recording, and remove slots and port are for prompts. In this MRS linking view, select all available modules to enable recording all calls in the system.