Configuring Channel Settings

You need rights to modify the channel you configure (voice, e-mail, or chat).

The defined settings are inherited from the channel level to the queue level. You can also define some of the channel settings at the queue level. These settings are marked with an asterisk (*) in the queue settings. An empty field or the option Not Defined in the queue settings means that the setting follows the channel setting. If you define the value at the queue level, it overrides the channel setting for this queue.

Note:

When defining Extra Data Settings, notice that call attached data (CAD) used for customer indentification is subject for manipulation. We recommend using two-factor authentication.

  1. On the System Configurator main screen, choose System Management > Channels.
  2. Choose the channel.
  3. Configure the settings according to the following tables. The tables below refer to parameter groups that may appear in different order on the user interface for different channels (voice, e-mail and chat).
    Table 1. Contact Management Settings

    Channel Type

    Field

    Function

    Voice

    Use Early Queuing

    To activate early queuing in the voice channel, select this option. The function must be enabled in Advanced Settings in Call Switching > Global Switching Settings.

    Voice, e-mail, and chat

    Timeout for Contacts to be Picked or Rejected

    Enter a time to define how long a conversation is being offered in Communication Panel or Communication Desktop (CDT). For chat and email on both channel and queue levels, the default value is 120000 (2 minutes). For phone on both channel and queue levels, the default and maximum value is 60000 (1 minute).

    The queue-level value must be less than the one defined for the channel.

    Automatic Not Ready Status in Communication Panel

    To change the agent status to not ready when the defined time has elapsed if the agent hasn't responded to the offering with the Accept or Reject buttons, define the following settings:
    • Timeout for Contacts to be Picked or Rejected in Queue Management > Queues > Contact Management
    • Activate Not Ready After No Response in Queue Management > Queues > Client Settings
    • Number of Offerings Before Activating Not Ready in User and Role Management > User Settings Template > Communication Panel Settings

    Timeout in Communication Desktop (CDT)

    If you define timeout for contacts also in Users and Role Management > Users/User Settings Template > Contact Settings > Answer Timeout for Queue Contacts, CDT follows the user setting. For example, if Timeout for Contacts to be Picked or Rejected is 2 minutes and Answer Timeout for Queue Contacts 30 seconds, CDT rejects a queue contact after 30 seconds. CEM stops allocating it after 2 minutes.

    Voice

    Non-Autom. Connection

    Optional for advanced use: enter a comma-separated list of commands which do not cause the call to be connected when Early Queuing is in use. Possible commands are CALL_TRANSFER, CALL_JOIN, and GENERATE_DTMF.

    Voice

    DTMF Character for Forwarding

    Enter the DTMF character that allows callers in a queue to be transferred to a voicemail or to be transferred in another predefined way.

    The default value is the pound (#) key.

    You can transfer callers to the voicemail in the following ways:

    • By selecting the Transfer to Voicemail if Queue Is Full option in System Services > Voicemail Settings

    • By choosing VOICEMAIL for the Forwarding Number after DTMF Character field in Queue Management > Queues > Contact Management > Forwarding

    Voice, e-mail, and chat

    Number of Agents Affect Queue Size

    Enter the value to define how the number of available agents affects the maximum size of the queue.

    que len = max que len + (QueueLenSlope x available opers)

    max que len means the queue size defined in the queue configuration.

    The value for this setting can be one of the following:

    • x = 0 -> No effect (the configured static queue size).

    • x is greater than 0 -> More agents, longer queue.

    • x = 1 -> One additional agent means one more queue place.

    • x is smaller than 0 -> More agents, shorter queue.

    The default value is 0.0.

    E-mail

    Max. Number of Unhandled E-Mails

    Enter the number to define how many unallocated e-mails there can be before CEM stops reading new e-mails from the mail server. The default value is 2000.

    Voice

    Allow Routing to Closed Overflow Queue

    Select this option if you want that calls can be routed to an overflow queue even when the overflow queue is closed according to a schedule. Usually calls are never routed to closed queues but in some cases, you may want the callers to hear the ServiceClosed prompt file.

    Voice

    Reference Timestamp for Calculating Queueing Time

    Choose the timestamp to be used for calculating call priorities. The priority affects call allocation, see Allocation Priority Calculations. The default value is Call Enters Contact Center 1st Time.

    • Call Enters Contact Center 1st Time: Queuing time starts when the call enters the contact center application for the first time. The Welcome and Prewelcome messages are included. If the call is transferred from a queue or application to another (for example from the contact center to an IVR), the time is not reset.

    • CEM Receives Call Information: Queuing time starts when CEM Server gets the CALL_COMING message. If the call is transferred from a queue or application to another (for example from the contact center to an IVR), the time is not reset.

    • Call’s Last Entry to Contact Center: Queuing time starts when the call enters the contact center for the latest time. The Welcome and Prewelcome messages are included. If the call is transferred from a queue or application to another (for example from the contact center to an IVR), the time is reset.

    • Call Enters Queue: Queuing time starts when the call enters the current queue or application for the latest time. The Welcome and Prewelcome messages are not included.

    Voice

    Show Original Source Number to External Agents and MTD Devices

    Select this option if you want that external agents see the original external source number when a call is transferred from a queue.

    This is an operator-specific function and is supported by certain hardware only.

    Voice, e-mail, and chat

    Block Rejected Contact from Agent

    For voice and chat channels:

    Choose from the following options whether an auto-allocated queue contact can be re-allocated to the agent, who has rejected the contact or who did not pick it before either Timeout for Contacts to be Picked or Rejected or Answer Timeout for Queue Contacts expired. Note that if a contact is forwarded into another queue, the contact can be allocated to the same agent again.

    • Yes: Blocks all re-allocations from the queue.

    • Never: The contact can be offered to the same agent several times.

    • No Blocking if Contact Redirected after Max Waiting Time: Depends if the queue forwarding options Forward if All Agents Have Absence Profile or Are Logged Off from Queue or Forward if Allocating Is Not Possible Immediately is in use:

      • If none of the above mentioned queue forwarding options is in use, behaves as Never.

      • If one of the above mentioned queue forwarding options is in use, behaves as Yes.

    For e-mail channel:

    To block all re-allocations the queue, select the checkbox.

    By default, this option is not selected.

    Chat

    Timeout for Idle Chats

    Enter a value to define how soon idle chats are removed. A chat is considered idle when there is no active text or video session in progress. The minimum value is 3 minutes and the maximum is 1 day. The default value is 10 minutes.
    Chat Warning Time for Idle Session
    Define a time after which a prompt message is sent to inform the customer that the chat has been idle and will be disconnected when the time you defined for Timeout for Idle Chats is reached. Use the prompt type Idle Session Warning Message and the variables Idle Session Duration and Warning Time for Disconnection. For more information, see Creating Prompts.

    Chat

    Busy During Wrap-Up

    Select this option if you want the a chat session in the wrap-up mode is considered as an active chat session and counted to the Maximum Number of Chat Sessions value defined in User and Role Management > User Settings Template > Contact Settings.

    example:

    The setting Busy During Wrap-Up is enabled either at the channel or queue level. The Maximum Number of Chat Sessions value is 3, and an agent has two active chat sessions and one in the wrap-up mode. The agent is not offered a new chat request until the chat session in the wrap-up mode is handled.

    Voice and chat

    Max. Waiting Time for Preferred Agent

    Define how long the system waits for the preferred agent to be available before it allocates the conversation to another agent.

    The function is automatically enabled.

    Calls

    The default value is 10 seconds.

    For example, the preferred agent can be the last agent who answered the call. This is useful when a blind transfer fails and the call comes back to the queue. Then the system tries to reallocate the call to the same agent. In the hunt group mode, another agent is still able to take the call before this time has elapsed.

    Note that the function works only in a call transfer during one call event.

    Social chats

    The default value is 2 minutes.

    A social chat will have a preferred agent in Communication Panel's picklist if the chat starts waiting for the preferred agent to become available. This happens when the chat is registered to the queue, and the preferred agent:

    • is logged in and not logging out.

    • is serving in the associated chat queue.

    • doesn't have an absence type profile active.

    • isn't serving in a campaign.

    • isn't being offered another conversation (allocated but not yet accepted).

    • has another connected conversation or the agent's status is Not Ready.

    In other cases, the chat is either allocated to the preferred agent directly or allocated to any available agent.

    If the queue setting Allow Picking Chats from Preferred/Required Agents is selected, other Communication Panel agents can pick the chat before the waiting time has elapsed.

    Voice, e-mail, and chat

    Skill Expiry Time

    Enter a value to define how long time a skill requirement is valid. After this expiry time the contact can be allocated also to other agents if there has not been any agents available with the required skill level. The other option is to use skill reduction, see Defining Skill Reduction Values.

    The default expiry times are:

    • For phone calls: 10 minutes

    • For e-mails: 1 week

    • For chat contacts: 10 minutes

    E-mail

    Default Expiry Time for Required Agent

    Enter a value to define how long the Required Agent requirement is valid. After this expiry time the contact can be allocated also to other agents if the required agent has not been available. The default value is 1 week.

    Table 2. Transfer Settings

    Channel Type

    Field

    Function

    This group is for voice channel only.

    Voice

    Enable Transfer-On-Hold When Busy

    Choose whether an agent can receive another call immediately after transferring an active call to a mobile phone or to an external number. In a normal situation, no calls are offered to the agent when this type of a target number is busy. This option has effect only if the transfer-on-hold method is in use.

    Voice

    Timeout for Transfer-On-Hold

    Enter the timeout for calls that are not answered. This is only useful if the transfer-on-hold method is in use. If the call is not answered within the defined time, the call is considered as failed and CEM informs the Communication Desktop (CDT) or Communication Panel (CP) application that there was no answer. If the user wants to try the transfer again, the attempt must be repeated manually. The default value is 3600 seconds.

    Voice

    Enable Join Transfer

    For advanced use only. Choose whether an alternative call transfer method is in use. In this case, CEM keeps the original call to the first destination waiting and initiates a new call to the second destination. These two calls are not connected until the new call to the second destination is successfully connected.

    Voice

    Timeout for Join Transfer

    For advanced use only. Enter the timeout for calls to be connected to an external number. See the Enable Join Transfer option. The default value is 30 seconds.

    Voice

    Enable Barring of Internal Transfers

    By default, internal transfers are not barred in a location that is used as a barring group. To enable barring internal transfers as well, select this option.

    Table 3. Reporting and Monitoring Settings

    Channel Type

    Field

    Function

    Voice, e-mail, and chat

    False-Attempt Limit

    Enter the threshold time limit that determines if a contact was a false attempt (not abandoned). Affects Service Level calculation, see below.

    The default values are as follows:

    • For phone queues: 5 seconds

    • For e-mail queues: 0 (not in use)

    • For chat queues: 30 seconds

    Voice, e-mail, and chat

    Answered-on-Time Limit

    Enter the time limit that determines if a contact was answered on time. Affects Service Level calculation, see below.

    The default values are as follows:

    • For phone queues: 20 seconds

    • For e-mail queues: 60 minutes (1 hour)

    • For chat queues: 60 seconds (1 minute)

    Voice, e-mail, and chat

    Max. Handling Time

    For advanced use only. Enter the maximum value used in the reporting. If a contact’s handling time exceeds this time, the contact is not included in reporting but it is listed as an exception in Data Transformation Engine (DTE) Reporting.

    The default values are as follows:

    • For phone queues: 10 hours

    • For e-mail queues: 30 days

    • For chat queues: 4 hours

    Voice, e-mail, and chat

    Max. Waiting Time

    For advanced use only. Enter the maximum value used in reporting. If a contact’s waiting time exceeds this time, the contact is not included in reporting but it is listed as an exception in Data Transformation Engine (DTE) Reporting.

    The default values are as follows:

    • For phone queues: 1 hour

    • For e-mail queues: 30 days

    • For chat queues: 2 hours

    Service level of a contact center or a specific queue is calculated as percentage of contacts answered-on-time of arrived contacts, false attempts are not included, SL = 100% x calls answered on time / (arrived calls-false attempts).

    Table 4. E-Mail Settings

    Field

    Function

    When Replying to Emails

    Select what you want Communication Panel to do when replying to emails:

    • Keep Email Chain (Default)
    • Remove Email Chain
    • Show User an Option to Keep or Remove Email Chain: The agent can select if they want to include the email chain when replying.

    Time Limit for Accepting E-Mails

    Define the time an agent has to accept allocated conversations from the email channel. If the agent does not accept within the time limit, the conversation is returned to the queue. If you change the value, it does not affect conversations that have been already allocated.

    Values are as follows:
    • 0 = not in use
    • 1 = a week

      This is the default value.

    • Other numeric values are interpreted as seconds.

    The time limit value is based on a schedule time. For example, if the limit value is 1 week and the queue is open from 09:00 to 17:00, the limit is not reached after 1 week because the time the queue is closed is not calculated into the limit value.

    In advanced use, the parameter can also refer to an external SOAP, COM or Python call. For more information, contact Sinch.

    Customer Information

    Enter a value to define how the external customer info should be determined.

    In advanced use, the parameter can also refer to an external SOAP, COM or Python call. For more information, contact Sinch

    Use Required Agent Instead of Preferred Agent

    To use the required agent function instead of the preferred agent function, select this option.

    Default Expiry Time for Required Agent

    Define how long the required agent requirement is valid. After the required agent requriment has expired, the conversation can also be allocated to other agents. The default value is 1 week.

    Preferred Agent

    To prefer the agent that has been in the related email conversation before, use the value 1. To allocate the email for the first appropriate agent, use the value 0. Other values are reserved for customized use.

    In advanced use, the parameter can also refer to an external SOAP, COM or Python call. For more information, contact Sinch.

    Block E-Mail from Addresses

    Enter a comma-separated list of addresses and names you want CEM to filter out. This means that e-mails from these persons are blocked. By default, this kind of spam filter is not used.

    In advanced use, the parameter can also refer to an external SOAP, COM or Python call. For more information, contact Sinch.

    Language Definition Method

    Enter a custom method name for setting the e-mail language. By default, the queue or extension language is used.

    In advanced use, the parameter can also refer to an external SOAP, COM or Python call. For more information, contact Sinch.

    Old E-Mails Deleted After (d)

    Enter the number of days after which CEM removes e-mails from the Received folder on the IMAP mail server. The default value is -1, which means that the setting is not in use.

    Priority Definition Method

    We recommend defining e-mail priorities with keywords instead of using this option, see Creating E-Mail Keyword Rules.

    In advanced use, it is possible to set the e-mail priority with a custom method. By default, the queue or extension priority is used. The parameter can also refer to an external SOAP, COM or Python call. For more information, contact Sinch.

    Table 5. Advanced Settings

    Channel Type

    Field

    Function

    Voice

    Delayed Acceptance Time

    Enter the time that Call Dispatcher (CD) delays the sending of CALL_ACCEPT.

    Voice

    Display Original External Source Number

    Select this option if you want that CEM attempts to display the original external source number (A number) when it transfers a call from a queue to an external number. Normally it displays the queue number as the source number. The R number is an operator-specific function and requires a special hardware configuration. For more information, contact Sinch.

    Voice

    Indicate if Original External Source Number Is Unknown

    Select this option if you want that CEM indicates whether the original external source number (A number) is unknown when CEM transfers a call from a queue to an external number. Normally it displays the queue number as the source number. An unknown number means that the A number is hidden (CLIR, Calling Line Identification Restriction, is used).

    E-mail

    Find E-Mail Address of Sender

    For advanced use only. Select this option if you want that the software tries to find the address of the real sender of the e-mail (for example from the e-mail body text).

    This setting has no default CEM action since it can also refer to an external SOAP, COM or Python call only. Even when the option is selected, CEM uses the sender of the e-mail. By default, the option is not selected.

    E-mail

    Find Name of E-Mail Sender

    For advanced use only. Select this option if you want that the software tries to find the name of the real sender of the e-mail (for example from the e-mail body text).

    This setting has no default CEM action since it can also refer to an external SOAP, COM or Python call only. Even when the option is selected, CEM uses the sender of the e-mail. By default, the option is not selected.

    Table 6. Extra Data Settings

    Channel Type

    Field

    Function

    E-mail

    Extra Data Included When E-Mail Allocated

    Enter a comma-separated list of field names (for example Language, Skills, or any custom key-value pair to define host application specific data added in Task Management Interface) that are sent to the user interface when an e-mail is allocated to an agent. This setting is used with Embedded Communications Framework (ECF) and is also available in the queue view at Queue Management > Queues when you select an email queue and open the Contact Management block.

    Voice

    Extra Data Included When Allocating Calls

    Enter a comma-separated list of field names (for example CallerID, IVRInfo, Skills, Language, Class, CallGUID, ExternalData) that are sent to the user interface when a call is allocated to an agent.

    The data may contain information collected by an IVR application and items like call GUID, skills, language, and so on. This data can be used by ClientCOM or JavaScript customizations.

    Voice

    Extra Data Included in Outbound Calls

    Enter a comma-separated list of field names that are sent with outbound calls, transferred calls, and consultation calls.

    The following fields are always automatically sent with consultation calls: FirstANumber, FirstBNumber, FirstAName, FirstBName, CALL_ID, CallGUID, CallReason. The default value is "" (only the default fields are sent).

    Note: To pass this information to external number, define the settings Call Switching > Trunks > Call Attached Data (CAD), see Managing Trunks.

    Voice

    Extra Data Included When Connecting Calls

    Enter a comma-separated list of field names (for example CallerID, IVRInfo, Skills, Language, Class, CallGUID, ExternalData) that are sent to the user interface when a call is connected.

    The data may contain information collected by an IVR application and items like call GUID, skills, language, and so on. This data can be used by ClientCOM or JavaScript customizations.

    Voice

    Extra Data Included When Supervising Calls

    Enter a comma-separated list of field names (for example CallerID, IVRInfo, Skills, Language, Class, CallGUID, ExternalData) that are sent to the user interface when a call is being supervised in Communication Desktop (CDT). This setting does not apply to Communication Panel, where the supervisor sees the same extra data as the supervised agent.

    The data may contain information collected by an IVR application and items like call GUID, skills, language, and so on. This data can be used by ClientCOM or JavaScript customizations.

    Voice

    Extra Data Included When Completing Consultation Calls

    Enter a comma-separated list of field names (for example CallerID, IVRInfo, Skills, Language, Class, CallGUID, ExternalData) that are sent to the user interface when a consultation call is completed.

    The data may contain information collected by an IVR application and items like call GUID, skills, language, and so on. This data can be used by ClientCOM or JavaScript customizations.

    Voice and chat Extra Data Included in Statistics Enter a comma-separated list of field names you want to store in the database and to be visible in the History view of Communication Panel and in reports.

    Note the following about this setting:

    • It is not recommend to store data that would include sensitive data.
    • If this setting is empty, nothing is saved.
    • For chats:
      • Using the asterisk (*) saves all extra data.
      • Extra data must be included before the chat conversation is answered by an agent.
      • Name and email are removed from the attached data.
    • Users need Statistic Details rights to view extra data in Communication Panel.
    • For chat conversations extra data is not stored if the chat is not allocated to an agent; it is considered as an abandoned conversation.
    Table 7. Weight Value Settings

    Channel Type

    Field

    Function

    Note:
    • To increase the importance of a parameter, set the weight value above 1, and to decrease the importance, set the value from 0 to 1.

    • When you adjust weight value settings take into consideration other parameters that affect allocation. For example, if you use skills in your system and you use the value 20 for Importance of Contact Waiting Time, the importance of the contact’s waiting time increases so much that skills are practically ignored. See Allocation Priority Calculations.

    • For more information, see Priority.

    Voice, e-mail, and chat

    Importance of Contact Waiting Time

    Enter a value to define how important the contact’s waiting time is when selecting a next contact for a free agent. The default value is 1.

    Voice, e-mail, and chat

    Importance of Agent's Waiting Time

    Enter a value to define how important the agent’s waiting time is when selecting an agent for a contact. The default value is 1.

    This setting has an effect only if there are two or more agents available.

    You can also use Target Time for Agents with Low Skill Levels in Miscellaneous Settings for adjusting the similar setting.

    Voice, e-mail, and chat

    Importance of Agent Priority

    Enter a value to define how important the agent priority is when selecting an agent for a contact or a contact for an agent. A greater value than 1 increases importance, and a value smaller than 1 decreases the importance. The default value is 1.

    Voice, e-mail, and chat

    Importance of Skill Matching

    Enter a value to define how important the skill matching is when selecting an agent for a contact or a contact for an agent. The default value is 1.

    Voice, e-mail, and chat

    Importance of Contact When on Same CEM as Agent

    Note:

    Typically, this does not concern Sinch Contact Pro cloud.

    Choose a value to define the importance of a contact when the contact is on the same CEM as an agent. The default value 1.00 which means that all contacts on different CEMs have the same priority. A greater value than 1 means that the contact on the same CEM is more important.

    This setting can also be defined at the queue level.

    Voice, e-mail, and chat

    Importance of Agent When on Same CEM as Contact

    Note:

    Typically, this does not concern Sinch Contact Pro cloud.

    Choose a value to define the importance of an agent when the agent is on the same CEM as a contact. The default value 1.00 which means that all agents on different CEMs have the same priority. A greater value than 1 means that the agent on the same CEM is more important.

    This setting can also be defined at the queue level.

    For more information about how priority values can be used in the system, see Priority.

    Table 8. Recording

    Channel Type

    Field

    Function

    Voice

    Recording Behavior with Consents

    Select how customer consents are used in recording:

    • Ignore Consents: Customer consents (the ones asked for a current call with an IVR, nor the ones saved in database earlier, or imported from an external system) do not affect recording. The default value.

    • Ask For and Follow Customer Consent: If customer consent is not found in database, it is asked with an IVR. Calls are recorded only if there is a customer consent to record the call. If you select this option on the channel level, consent question is asked in all inbound calls, both direct and queue calls, assuming that proper prompts are added, and the IVR number defined. For more information, see Consent IVRs.

    Voice

    Consent IVR Number

    Select or enter either the built-in consent IVR number defined in System Services > Recording Settings > Consent IVR, or the custom IVR number defined in IVR Management. This consent IVR is then used for all phone queues in the system, unless a queue-specific value is defined.

    This number can be defined for the entire system on the channel level though the consent IVR is used only in queue calls, or some specific queues. In that case choose Ignore Consents on the channel level, and the option Ask For and Follow Customer Consent in a queue's contact management.

    Table 9. Miscellaneous Settings

    Channel Type

    Field

    Function

    E-mail

    Send Autom. Reply Only on First Allocation

    Select this option if you want that the first allocation triggers an automatic reply if an e-mail is allocated several times.

    E-mail

    Max. Number of Unhandled E-Mails per Agent

    Enter a value to define how many unhandled pending e-mails an agent can have in the channels controlled by CEM. The default value is 50.

    All active e-mails must have the Pending status in the Communication Desktop (CDT) or Communication Panel (CP) application before CEM allocates more e-mails to an agent.

    Voice

    Max. Number of Allowed External Call Loops

    Enter the maximum number of allowed external call loops.

    For example, you call agent A that has a direct transfer to number B. Then there is a call transfer to number C, and again there is a transfer back to the A number that has a direct transfer to number B, and so on. If the number of loops (calls from the same A number to the same B number, and forwarded to the same C number) is greater that the value of this setting during the time defined with the Timeout for Allowed External Call Loops setting, the extra calls are disconnected. The C number must be a direct number. The default value is 4.

    Voice

    Timeout for Allowed External Call Loops

    The default value is 60000 milliseconds.

    Voice

    No. of Queue Calls Sent to and Displayed on Virtual Phone

    Note: This setting is related to hunt group queues which are not supported in Sinch Contact Pro.

    Enter the number of calls in a queue that are sent from CEM to the virtual phone and displayed in the order of priority when an agent logs into the queue.

    This limitation saves resources and applies to all hunt group queues. The default value is 5.

    example:

    An agent serves in the following hunt group queues: Q1 (has 3 calls), Q2 (has 5 calls), and Q1 (has 1 call). If the default value 5 is used, CEM sends 3 calls from Q1 and 2 calls from Q2 to the user interface. Rest of the calls are not displayed.

    Voice

    Ringing Time for Agent's Direct Queue when Agent Busy

    Enter the ringing time used in the agent’s direct queue instead of the normal ringing time.

    Voice

    Timeout for Virtual Channel

    Enter the time for a timeout. If the connection to a terminal client or to the module that controls external terminals (ETC) is disconnected unexpectedly, the session of the disconnected client is put to a paused status. If the connection is not restored during the timeout, the system forces an agent to log out. The default value is 120000 milliseconds.

    Voice

    Unavailability Time During Transfer-On-Hold

    Enter a value to define how long an agent is reserved for the transfer before the next call is possible. The default value is 5 seconds.

    Voice, e-mail, and chat

    Target Time for Agents with Low Skill Levels

    Enter a value to define how often an agent with the lowest level of skills should have contacts. This ensures that no agent is left without contacts (but if a skill requirement for the contact is 5, the contact is never allocated to an agent without the required skill).

    Increase the value to make this waiting time less important. The default value is 24 hours.

    You can also use Importance of Agent Priority in Weight Value Settings for adjusting the similar setting.

    Voice, e-mail, and chat

    Use Absolute Waiting Times in Skill Reduction

    Select this option if you want that the defined skill reduction values are always used. Otherwise, if there are no agents with the required skill level serving in the queue, the requirement is lowered to match the highest skill level of a serving agent.

    For more information about skill reduction, see Defining Skill Reduction Values.

    Voice, e-mail, and chat

    Extend Skill Reduction

    Select this option if you want that the reduction applies also to skill requirements that have not been defined for the queue. This includes skill requirements set in the previous queue or by IVR, email keywords, and requirements set via interfaces (Online Integration Interface (OII) or Task Management Interface (TMI) ).

    For more information about skill reduction, see Defining Skill Reduction Values.

    E-mail

    Timeout for Open Emails

    Enter a value to define when open email channel conversations are set to the pending state. This means the conversations, both emails and tasks, that are open because the agent has signed out or the browser session is abruptly closed. The conversations are therefore automatically saved. If the agent (current conversation owner) signs back into Communication Panel before the set Timeout for Open Emails time has elapsed they can continue.

    If the conversation owner remains signed out and the timer elapses, the conversation is put automatically to a pending state for picking by others also.

    The default value for the timeout is 1 day.

    Note the following:

    • Although the system looks for open email channel conversations of signed-out agents to be set to the pending state approximately every one minute, the interval can be some seconds longer due to, for example, network or database slowness.

    • When CEM starts, the signed-out timestamp of an agent is the time the first one of the agent's conversations is registered with the routing engine. This means that at the earliest the conversation status is set to pending is after the time defined in the timeout setting added with 1,5 minutes.

  4. Save your entries.